中文 电脑版

Application · steel & cleaning

High-pressure descaling and cleaning pumps

20–30 MPa at the descaling header, or 10–40 MPa at the cleaning nozzle. Both punish anything that cannot hold pressure without leaking.

The duty

In hot rolling, the descaling header needs a pressure that stays flat through the pass and recovers at once when the valve opens. Industrial cleaning and water jetting need the same, with a flow that follows the number of nozzles in use.

A centrifugal unit sheds pressure the moment flow jumps at valve opening. On a descaling header that shows up as incomplete scale removal and a patchy strip surface — a quality problem before it is an energy problem.

How we specify it

Selection range

UDZ 100/16 to UDZ 320/16 with high-pressure trim cover 20–200 m³/h at 10–40 MPa; special trims to 70 MPa on request. The skid is built around the duty cycle, because a descaling pump spends its life starting and stopping.

← 左右滑动查看完整表格 / swipe to see all columns
DutyTypical value
Flow20–200 m³/h
Pressure10–40 MPa (to 70 MPa on request)
Responsefast-acting unloader
Filtration100 µm or better
Efficiency>90%
RangeUDZ 100/16 – UDZ 320/16

What we need to quote

Retrofitting a descaling or cleaning skid?

Send header pressure, nozzle flow and the valve cycle — we will size the pump and the accumulator.

Send details
Multi-plunger pumpsSlurry pumpsMaglev blowersMobile pump unitsMotors IE3–IE5VFD motorsIndustrial AI box

大连宏实科技有限公司 · DALIAN HONGSHI TECHNOLOGY

Related sites Fluid machinery energy-saving calculator·KSTS — biogas & bioenergy, Sabah

jeeftang@hschina.com

© 2026 · Mobile edition · 手机版

⌂Home ✉Get a quote