中文 电脑版

Application · mineral processing

Filter press feed pumps that hold pressure through the whole cycle

A filter press asks for low flow at first, then constant pressure as the cake builds. A centrifugal pump delivers the opposite. A positive-displacement slurry pump delivers what the press actually needs.

The cycle, and why it matters

Filling: the chambers are empty, so resistance is low and flow is high. Squeeze: the cake is formed, resistance rises, and the pump must hold pressure at very low flow without dead-heading itself to destruction.

A centrifugal pump lives on its curve — as resistance rises, flow collapses and so does pressure. Operators compensate by throttling or by accepting a longer cycle. A plunger pump displaces a fixed volume per stroke, so pressure is set by the relief valve and the cycle stays short.

Practical benefits

Sizing note: feed pumps are usually sized on the fill rate, not on the average flow. Tell us chamber volume, cycle time target and slurry density.

← 左右滑动查看完整表格 / swipe to see all columns
ParameterTypical
Flow100–400 m³/h
Pressure0.8–1.5 MPa
Solids30–60% by weight
Efficiency>83%
ModelV5 vertical five-plunger

Compared with a centrifugal feed pump

Tell us your press size

Chamber volume, target cycle time and slurry density — we will size the feed pump and give you the expected cycle.

Request a selection
Multi-plunger pumpsSlurry pumpsMaglev blowersMobile pump unitsMotors IE3–IE5VFD motorsIndustrial AI box

大连宏实科技有限公司 · DALIAN HONGSHI TECHNOLOGY

Related sites Fluid machinery energy-saving calculator·KSTS — biogas & bioenergy, Sabah

jeeftang@hschina.com

© 2026 · Mobile edition · 手机版

⌂Home ✉Get a quote