Application · water transfer
Lifting water several hundred metres — mountain irrigation, plateau supply, high-lift drainage. The static head does the work; the pump has to do it efficiently.
Mountain irrigation and plateau water supply need lifts of 300–2,500 m, often over long pipelines, with reservoir levels that move through the season. Past a certain lift a single centrifugal stage cannot reach, and multistage units stack losses stage after stage.
Because static head dominates, every point of pump efficiency is multiplied across the whole lift — and the pipeline has to be protected against surge when the pump stops.
UDQ 60 through UDZ 600, single unit or series staged: 50–500 m³/h at 300–2,500 m of head, discharge up to 25 MPa. The number of stages is set by the lift, not by a catalogue page.
| Duty | Typical value |
|---|---|
| Flow per pump | 50–500 m³/h |
| Total head | 300–2,500 m |
| Discharge pressure | 3–25 MPa |
| Configuration | single unit or series staged |
| Solids | low, some silt |
| Range | UDQ 60 – UDZ 600 |
Send the lift, pipeline and flow — we will come back with the number of stages and the power draw.